+86 13670059980 Simon@hongzhi-mold.com

Home > News > Company news

News

Company news
How To Deal With The Silver Streaks And Bubbles Of The Injection Molded Plastic Shell?
How To Deal With The Silver Streaks And Bubbles Of The Injection Molded Plastic Shell?

2022-01-07

If the plastic is disturbed by the gas during the filling process, then the surface of the plastic shell will have silver stripes, tiny bubbles or bubbles formed in the wall of the plastic shell. The main sources of these gases are: the raw materials cont

MORE >>

Design Principles Of Straight Top Block And Thimble For Automobile Mould
Design Principles Of Straight Top Block And Thimble For Automobile Mould

2022-01-07

Ⅰ. The design principles of the straight top block for the automobile mould1. The mating length of the straight top link and the guide sleeve must be greater th……

MORE >>

The First Two Stages Of Home Appliance Mold's Development
The First Two Stages Of Home Appliance Mold's Development

2022-01-07

As most parts and components of household electrical appliances are produced by molds, their appearance, shape, and structure reflect the complexity of molds. The change of household appliance products depends on the research and development and manufactu

MORE >>

High-Quality Home Appliance Mold Materials And Advanced Surface Treatment Technology
High-Quality Home Appliance Mold Materials And Advanced Surface Treatment Technology

2022-01-07

The development trend of steel that is used in European and American household appliances is carbon tool steel, low alloy tool steel, high alloy tool steel. A series of new mould materials have appeared, and the alloying degree of standard steel of mould

MORE >>

Advanced Manufacturing Technology Of Home Appliance Mould
Advanced Manufacturing Technology Of Home Appliance Mould

2022-01-07

Household appliance products are becoming larger and larger. "one mold with multiple cavities," which is developed to improve production efficiency, also leads to larger and larger household appliance molds. At the same time, the rapid developme

MORE >>

TPE Material Key Point in Injection Molding Process
TPE Material Key Point in Injection Molding Process

2022-01-07

TPE material, also known as thermoplastic elastomer, is a polymer material that has both the characteristics of plastic and rubber, shows the high elasticity of rubber at room temperature, can be plasticized and formed at high temperature.Various new TPE

MORE >>

           
Home  |  Contact Us

About Us

Capability

Facility

Contact Us

  • Simon
    +86 13670059980
    Simon@hongzhi-mold.com
    Web: www.hongzhi-mold.com  
    Office Address:

    Room 201, Building B, Xinxin 'an High Salary Science Park, No. 11, Tianyangwu Road, Songgang Street, Shenzhen. China Factory Address: Building V, Shangxia Wei Second Industrial Zone, Shasan Community, Shajing Street, Shenzhen City, Guangdong Province



CopyRight © 2022 Hongzhi Precision mold Technology (Shenzhen) Co.,Ltd. All Rights Reserved.